|
|
Weather Station with Ethernet Interface
Novák, Pavel ; Šimek, Václav (referee) ; Bartoš, Pavel (advisor)
This thesis deals with the design and construction of the meteorological station. The meteorological station is designed and constructed to be able to measure the basic meteorological parameters (temperature, humidity, air pressure) and the other three variables (measuring rainfall, wind speed, wind direction). This thesis will introduce you to meteorology. Meteorology determines the daily weather forecast and the results are used for examples in aviation or maritime affairs. The method of atmospheric origin is given in the theoretical part. Meteorology must use measuring instruments to determine quantities. The dissertation also includes analysis of the measuring instruments. The meteorological station uses the Ethernet technology. In the chapter devoted to Ethernet are described its principles, types and method of power supply over Ethernet. The following section describes the design of the entire meteorological station, selection of all components and description of their connection. The chapter about implementation contains a description of the parts which forms program part of the meteorological station. The aim of the thesis is a summary of the achieved results including price comparison of the renovated meteorological station with other meteorological stations, which can be normally bought.
|
|
|
Wireless meteostation
Holain, Martin ; Macháň, Ladislav (referee) ; Háze, Jiří (advisor)
The objective of this thesis is a design of the amateurish wireless weather station which is used to measure temperature, relative humidity, barometric pressure and velocity and direction of air flow. Part of this thesis also describes design of a device intended for display, processing and storage of actual measured data obtained from weather station.
|
|
|
Electronic thermometer and humidity meter
Lapáček, Petr ; Chmelař, Milan (referee) ; Lattenberg, Ivo (advisor)
This master´s thesis deals with the design of measuring station used for the temperature and humidity measurement. There is a theoretical basical description of sensores for temperature and humidity measurement in the first part. Furthermore I deal with a theoretical design of measuring system, especially with types of materials and possibilities of communication between these parts. The main part of thesis is about communication on buses I2C,UART, SPI, RS485. There is a description of function procedure of particular integrated circuit, moduluses which are used in task in the next part of thesis.In the practical part I was engaged in a functional design of autonomous system for the temperature and ralative humidity measurement. Data could be presented by the computer after connection with the station. There is a description of testing the particular circuits and the full description of function particular blocks of system in the task. I have used the program called Eagle for schemes and printed wirings designing. The copy is placed on CD ready for next using. In the last part of thesis is a brief description of program algorithm "Meteostanice", which I have created for data presentation. There is an illustration of measuring results in these last part. The task is completely ready for the realization of autonomous system of weather station with its own memory.
|
|
|
Design of a new iontometer with wireless communication and weather station
Kadlček, Václav ; Hrabina, Jan (referee) ; Roubal, Zdeněk (advisor)
This diploma thesis deals with the design of an autonomous system for the measurement of the concentration of atmospheric ions. This is a new version of the already asembled Iontmeter by UTEE FEKT. Unlike the previous version, this new one should be completely independent of electrical network and configurable even without a PC. The design includes increased water and dust resistance, wireless transmission from the weather station and its own temperature, atmospheric pressure and relative humidity sensor.
|
|
|
Wireless meteostation
Marčišovský, Peter ; Pavlík, Michal (referee) ; Háze, Jiří (advisor)
This bachelor thesis deals with design of weather station, which is able to measure temperature, humidity, barometric pressure, direction and speed of wind and intensity of solar radiation. Whole device is divided into two parts. The sensor part situated in exterior and display part situated in interior. Wireless communication is used to communicate between this two parts. Measured data are displayed on display situated in interior in regular intervals. In addition, measured data are displayed in GUI application and stored to file, after connecting weather station to PC using Bluetooth module.
|
|
|
Automated measuring system for irrigating plants with IoT connectivity
Lahoda, Vladimír ; Polák, Ladislav (referee) ; Kufa, Jan (advisor)
This bachelor thesis deals with IoT networks and considers their use as part of embedded devices. The purpose of this device is to control the flower bed or garden based by data from sensors monitoring the environment. The device not only controls the irrigation operation itself, but also sends all traffic data over the IoT LoRa network. Thus, the device also functions as a weather station, as all data are sent to a second device that acts as a receiver. This receiver displays the data and also sends them to the Internet, where the data are publicly available. The module for sending and measuring data is mounted on its own PCB and is covered in a waterproof cover, so they can be operated outdoors. There is an integrated battery, which is a backup of savings in case of power failure. The battery is designed to back up power for 25 days.
|
|
|
IoT Home System
Kovařík, Viktor ; Drahanský, Martin (referee) ; Goldmann, Tomáš (advisor)
The aim of this thesis was to learn and summarize basic information about IoT systems, which protocols are used and introduction of Google Home system. The first part of the thesis describes the individual parts of the system --- microcontrollers, sensors, light elements and possible systems for backend. In the implementation part of the thesis was designed a solution for smart home controling using Google Home technology. Based on data from the weather station, the system controls and adjusts the intensity of outdoor lighting and controls the blinds. Furthermore, a control module for gate and garage door control is implemented. The system also takes care of vacuum cleaning in the house using iRobot Roomba vacuum cleaners with custom Wi-Fi module. The final part of the thesis summarizes the achieved results.
|
|
|
Wireless weather station
Mieržwinský, Leon ; Macháň, Ladislav (referee) ; Levek, Vladimír (advisor)
The diploma thesis is focused on the design and implementation of a prototype wireless home weather station. The goal is to measure the air temperature, relative humidity and atmospheric pressure. Measured data are stored in external memory and it is posibility to send to the computer for subsequent processing and evaluation.
|
|
|
Design of smart sensor equipped with LoRa technology
Šigut, Štěpán ; Pokorný, Jiří (referee) ; Štůsek, Martin (advisor)
Over the past years few trends have become as profound in the technology industry as yearly increases in battery capacity, transistor density and price drops for computing power. These trends follow a steep curve and drive what has become known as IoT or Internet of Things. Ever increasing number of devices connected to the internet are putting high demands on wireless network technologies. During the last decade several new wireless technologies have emerged and are competing to become the next go-to technologies for applications such as smart cities, smart cars and smart factories. LoRaWAN is one relatively new competitor to the market and is the central topic of this thesis.
|
|
|
Applications of Computers in Fishing Ship
Březina, Zdeněk ; Kolář, Martin (referee) ; Zemčík, Pavel (advisor)
The purpose of this thesis is to examine the problematics of embedded systems for boat fishing and analyzing the existing solutions. The main goal is to design author's own complex solution. The author's solution consists of a mutually communicating Android application and an Arduino-based platform with the necessary sensors.
|
guest ::
